Product ID:WATER BASE ENAMEL UNDERCOAT WHITE, 6-755
MSDS Date:06/05/1990
FSC:8010
NIIN:00N037699
MSDS Number: BQVBY

PPG INDUSTRIES INC

260 KAPPA DR
PITTSBURGH, PA 15238
US

Emergency Phone: 304-843-1300

Info Phone: 412-492-5555;800-245-2590

Cage: 47695

PPG INDUSTRIES INC

PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

LIMITS,LEL IN FIRE & EXPLO HAZS BELOW STATED LIMIT,&

RTECS: 9999999ZZ

ON SURFACES COATED WITH THIS PRODUCT.

RTECS: 9999999ZZ

DIATOMACEOUS EARTH; (SILICA, AMORPHOUS-DIATOMACEOUS EARTH)

CAS: 68855-54-9

Fraction By Weight: 2-5%

OSHA PEL N/K .

ACGIH TLV: N/K .

ALUMINUM SILICATE

CAS: 1335-30-4

Fraction By Weight: 2-5%

WATER; (DEIONIZED WATER)

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 30-35%

MEDIUM ALIPHATIC SOLVENT NAPHTHA

CAS: 64742-88-7

Fraction By Weight: 1-2%

ETHANOL, 2-BUTOXY-; (ETHYLENE GLYCOL MONOBUTYL ETHER)

CAS: 111-76-2

RTECS: KJ8575000

Fraction By Weight: 2-5%

OSHA PEL S, 50 PPM

ACGIH TLV: S, 25 PPM; 9293

FILM FORMERS, RESINS, AND ADDITIVES

Fraction By Weight: 10-15%

RPTD EXPOS TO HIGH VAP CONC MAY CAUSE IRRIT

RTECS: 9999999ZZ

MISUSE BY DELIB CONC & INHALG CONTENTS CAN BE

RTECS: 9999999ZZ

CONTAINS TITANIUM DIOXIDE. ANIMALS INHAL MASS QTYS

RTECS: 9999999ZZ

LUNG TUMORS. PROD CONTAINS AN ETHYLENE SERIES

RTECS: 9999999ZZ

ADVERSE EFTS ON KIDNEYS, LIVER, BLOOD &/OR

RTECS: 9999999ZZ

WHICH IARC ASSOC W/AN INCR RISK OF CANCER IN LAB

RTECS: 9999999ZZ

LEAD TO DISABLING INJ KNOWN AS SILICOSIS. EFTS ARE

RTECS: 9999999ZZ

STUDIES CLEARLY DEMONSTRATED DOSE-RELATED ADVERSE

RTECS: 9999999ZZ

ASSOC W/ADMIN OF ETHYLENE GLYCOL MONOBUTYL ETHER.

RTECS: 9999999ZZ

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 10-15%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

1); (CALCIUM CARBONATE) (PEL

CAS: 471-34-1

RTECS: FF9335000

Fraction By Weight: 20-25%

OSHA PEL 15 MG/M3

ACGIH TLV: 10 MG/M3

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGEST: HARMFUL/FATAL IF
SWALLOWED.EYE: CAUSES SEV EYE IRRIT.SKIN: MAY CAUSE MOD SKIN
IRRIT.MAY BE HARMFUL IF ABSORB THRU SKIN.INHAL: VAP & SPRAY MIST
HARMFUL IF INHALED. VAP IRRIT EYES,NOSE,& THROAT. VAP GEN AT
ELEVATED TEMPS IRRITEYES,NOSE & THROAT. SANDING & GRINDING DUSTS
MAY BE HARMFUL IF INHALED. (ING 9)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:EYE WATERING, HEADACHES, NAUSEA, DIZZINESS, AND
LOSS OF COORDINATION ARE INDICATIONS THAT SOLVENT LEVELS ARE TOO
HIGH. REDNESS, ITCHING, BURNING SENSATION AND VISUAL DISTURBANCES
MAY INDICATE EXCESSIV E EYE CONTACT. DRYNESS, ITCHING, CRACKING,
BURNING, REDNESS, AND SWELLING ARE CONDITIONS ASSOC WITH EXCESSIVE
SKIN CONT.
Medical Cond Aggravated by Exposure:NOT APPLICABLE.

First Aid:INGEST:DO NOT INDUCE VOMIT. CALL MD IMMED . EYE:FLUSH IMMED
W/PLENTY OF WATER FOR AT LST 15 MINS. SKIN:FLUSH IMMED W/PLENTY OF
WATER FOLLOWED BY WASHING W/SOAP & WATER. INHAL:REMOVE TO FRESH AIR
. APPLY ARTF RESP & OTHER SUPPORTIVE MEASURES AS REQD. OTHER: IF
ANY OCCUR DURING/FOLLOWING USE OF PROD,CONT POIS CNTRL CNTR,EMER
ROOM/PHYS IMMED. HAVE MSDS INFO AVAIL.INGEST, EXCESSIVE EXPOS
(SUPDAT)

Flash Point Method:PMCC
Flash Point:212F,100C
Extinguishing Media:USE NFPA CLASS B EXTING (CARBON DIOXIDE, DRY
CHEM/UNIVERSAL AQUEOUS FILM FORMING FOAM) DESIGNED TO EXTING CLASS
(SUPDAT)
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT
EQUIP.WATER SPRAY MAY BE INEFT.WATER SPRAY MAY BE USED TO COOL CLSD
CNTNRS TO PVNT PRESS BUILDUP & POSS (SUPDAT)
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE OR BURST
(DUE TO BUILD-UP OF STEAM PRESSURE) WHEN EXPOSED TO EXTREME HEAT.

Spill Release Procedures:PROVIDE MAXIMUM VENTILATION. ONLY PERS
EQUIPPED W/PROPER RESP & SKIN & EYE PROT SHOULD BE PERMITTED IN
AREA. REMOVE ALL SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST,
VERMICULITE OR OTHER ABSORBENT MATERIAL AND PLACE INTO CONTAINERS
FORDISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
CLASS IIIB LIQUIDS. PROTECT FROM FREEZING.
Other Precautions:IF MATERIAL IS PART OF A MULTIPLE COMPONENT COATING
SYSTEM, READ MATERIAL SAFETY DATA SHEET(S) FOR OTHER COMPONENT OR
COMPONENTS BEFORE BLENDING AS RESULTING MIXTURE MAY HAVE HAZARDS OF
ALL OF ITS PAR TS.

Respiratory Protection:OVEREXPOS TO VAPS MAY BE PVNTD BY ENSURING VENT
CNTRLS.VAP EXHST/FRESH AIR ENTRY.NIOSH/MSHA APPRVD (TC-23C) PAINT
SPRAY/AIR SUPP (TC-19C) RESP MAY ALSO REDUCE EXPOS.READ RESP MFR'S
INSTRUCTIONS & LITE RATURE CAREFULLY TO DETERM TYPE (SUPDAT)
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP CONC OF INGREDS BELOW LOWEST SUGGESTED EXPOSURE (ING 18)
Protective Gloves:NITRILE, NEOPRENE, OR LATEX GLOVES.
Eye Protection:CHEM WORK GOG W/FULL LGTH FACESHLD (FP N
Other Protective Equipment:WEAR PROTECTIVE CLOTHING, INCLUDING
IMPERMEABLE APRON CONSTRUCTED OF NITRILE, NEOPRENE, OR LATEX.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINTAED CLOTHING AND
SHOES.
Supplemental Safety and Health
EXTING MEDIA:IIIB LIQ FIRES.FIRE FIGHT PROC: AUTOIGNIT/EXPLO WHEN EXPOS
TO EXTREME HEAT.IF WATER USED,FOG NOZZ ARE PREF.HAZ DECOMP PRODS:
INCL: CARBON MONOXIDE. FIRST AID PROC:TO CORR MATL, PERSISTENT
SKIN/EYE IRRIT/BRTHG DFCLTYS.RESP PROT:OF AIRBORNE CONTAMS AGAINST
WHICH RESP IS EFT & HOW IT IS TO BE PROPERLY FITTED.

Boiling Pt:B.P. Text:>185F,>85C
Vapor Pres:16.8
Vapor Density:HVR/AIR
Spec Gravity:1.44
Evaporation Rate & Reference:32 (BUTYL ACETATE=100)
Solubility in Water:39.9
Appearance and Odor:VISCOUS LIQ W/ODOR CHARACTERISTIC OF CHEM FAMILY &
ANY SOLVS LISTED IN INGREDS.
Percent Volatiles by Volume:62.6

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PRODS WHEN
HEATED. WELDING, BRAZING/FLAME CUTTING ON SURFS COATED W/PROD MAY
PRDCE FUMES (SUPDAT)

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE, PROVINCIAL, AND LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
THROUGH AN APPROVED WA STE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.